Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Roswell
Gate installation in Roswell typically runs $2,800-$7,500 for a residential driveway gate with operator, and most projects require HOA architectural approval before a single post is set. We’re Vance Gate Repair, and our crews handle Gate Repair in Roswell regularly - from the gated enclaves off Holcomb Bridge Road to the established neighborhoods near Crabapple. Scheduling and dispatch run through our Atlanta office, but the technicians who arrive at your Roswell property know North Fulton’s red clay, its HOA approval timelines, and the specific failure modes that hit 25-35 year-old builder-installed gates here.
Call (678) 679-2152 for a free written estimate. We bring the price on paper before any work starts.
Why Vance Gate Repair Alpharetta Is Roswell’s Preferred Gate Installation Company
We’ve installed and rebuilt gates across Roswell’s dense concentration of HOA communities - one of the highest in metro Atlanta - since 2014. Our Gate Installation in Roswell work is governed by The Haven Standard: written scope, written price, and photographic evidence on every visit, no exceptions.
Our 365-Day Done Right Promise covers every installation. If something isn’t right, we make it right - no argument, no fee, no expiration within that window. That’s Clause 3 of the Haven Standard, and it’s in writing on every Roswell job.
A live person answers our phones 24 hours a day. No voicemail loop, no callback queue.
Our technicians are background-checked, uniformed, and named with photo before dispatch - so you know who’s arriving at your Roswell driveway.
Our Gate Installation Services in Roswell
Driveway Gate Installation
Most Roswell driveway gate calls we receive aren’t blank-slate installs. The 1985-2000 subdivisions here - think Horseshoe Bend, Martin’s Landing, the neighborhoods off Eves Road - are packed with first-generation builder swing gates whose hinge posts have been walking in North Fulton’s expansive red clay for 25-35 years. New gate panels often go onto rebuilt or replaced post footings before a single hinge is hung. We measure the existing opening, photograph the post condition, and quote the footing work separately so there’s no surprise once the old gate comes off.
Sliding Gate Installation
Sliding gates suit narrow Roswell driveways where a swing arc would clip the sidewalk or encroach on a neighbor’s property. We see recurring trouble in older Roswell communities where underground slide operators were buried with inadequate drainage. The Chattahoochee corridor keeps ground moisture elevated year-round, rusting buried hinge hardware and corroding conduit runs. When we install a new sliding gate in Roswell, we open the operator pit, assess the concrete pad and drainage, and replace rusted conduit before the new rack and pinion go in. In Horseshoe Bend, we opened an original early-1990s underground slide operator pit where clay-induced track heave had bent the rail and the out-of-production circuit board had already been bypassed once, and the customer’s real request was a new gate, not another sensor call. We installed a new Viking slide gate on a re-poured concrete pad with new rack and pinion, replaced the rusted buried hinge-side conduit serving the loop detector, and added a fresh keypad entry and safety photocell pair for the homeowner association’s shared entry. The gate now opens on the resident’s existing remotes, and the board no longer chatters on cold mornings.
Swing Gate Installation
Swing gates remain the dominant style in Roswell’s Colonial and Traditional-style subdivisions. The critical local factor is post stability. North Fulton County’s dense red clay soils expand heavily during wet seasons and shrink during summer droughts, causing gate posts to shift and lean over time. A replacement swing gate hung on a leaning post will strain the operator from day one, burning out limit switches and stripping gears within months. We plumb every post with a laser level, and if the footing has shifted, we excavate and re-pour before the new gate leaves our shop.
Pedestrian Gate Installation
Pedestrian gates in Roswell often accompany driveway installations in HOA communities, matching the ornamental iron or aluminum style of the main entry. We coordinate with your HOA’s architectural committee on height, finish, and hardware style before fabrication begins. In the Historic District core near Canton Street, replacement hardware can fall under city design guidelines, which restricts what gate styles and finishes are allowable - we verify this during our initial site visit so your application isn’t rejected.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Roswell
We install and service nine major automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - which means we can match your existing remote ecosystem or recommend the right motor for your Roswell gate’s weight and cycle count, including our Roswell Mighty Mule service. For common Roswell HOA setups, we stock LiftMaster and FAAC operator parts locally, and we carry Linear access-control hardware for communities upgrading from first-generation keypads. We don’t steer you toward a single brand. We name what fits, price it in writing, and install what you approve.
Common Gate Installation Problems We See in Roswell Homes
- Expansive red clay shifting original gate post footings. A replacement swing gate arrives out of plumb and strains the new gate operator from day one. We laser-check every post before hanging a new gate, and we re-pour footings that have walked.
- Clay-induced track heave on 25-35 year-old underground slide gate rails. The factory circuit board is out of production and a sensor call becomes a full track-and-operator replacement. We quote the full scope once the pit is opened, not piecemeal.
- Constant Chattahoochee-corridor ground moisture rusting buried hinge hardware. New gate hardware goes onto rotted steel if the footing isn’t opened first. We inspect and replace corroded components before the new installation.
- HOA architectural approval delays. Many Roswell HOAs require committee review of gate style, height, finish, and hardware color before work begins. We provide detailed spec sheets and photos of prior installations to support your application.
Pricing for Gate Installation in Roswell, GA
A typical swing gate installation in Roswell runs $2,800-$4,500, including new gate panel, posts, and a residential-grade operator. Sliding gates start around $3,800 and can reach $7,500 for heavy-gauge aluminum with a commercial-duty operator and full access-control package. Pedestrian gates matched to an existing driveway entry typically add $1,200-$2,400.
What moves the price: post footing condition (re-pour adds $400-$900 per post), operator brand and duty rating, access-control components (keypad, telephone entry, photocells), and whether the existing power run and conduit are intact. Every Roswell installation receives a written, itemized price before work starts - Haven Standard Clause 1. No call-for-a-quote, no surprise invoice.
| Service | Typical Range in Roswell |
|---|---|
| Swing gate with operator | $2,800 - $4,500 |
| Sliding gate with operator | $3,800 - $7,500 |
| Pedestrian gate (matched style) | $1,200 - $2,400 |
| Post footing re-pour (each) | $400 - $900 |
| Access-control upgrade (keypad/entry) | $600 - $1,800 |
Call (678) 679-2152 for a free written estimate. We measure, photograph, and price on site - no obligation.
We Also Serve Cities Near Roswell
Our Gate Installation crews work throughout North Fulton and Cobb County, including Roswell, Alpharetta, Marietta, Holly Springs, and Smyrna. Each city page details local conditions specific to that market - soil, housing stock, HOA density, and common failure modes - because a gate technician who knows Alpharetta’s newer construction may miss Roswell’s 1990s-era buried operators.
Serving Roswell, GA - Our Local Coverage Area
We’re based in the Roswell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Roswell
Yes, most Roswell HOA communities require architectural committee approval for gate style, height, finish, and hardware color before installation begins. We provide detailed spec sheets, material samples, and photos of our prior installations in comparable Roswell neighborhoods to support your application. Bring us your HOA’s design guidelines and we’ll build the submittal package - call (678) 679-2152 to schedule.
We won’t know until we excavate and inspect, but in Roswell’s 1985-2000 subdivisions we find shifted footings more often than not. North Fulton’s expansive red clay walks posts out of plumb over 25-35 years, and hanging a new gate on a leaning post destroys the operator within months. We laser-check every post during our free estimate; if the footing has moved, we quote the re-pour separately before any work starts. Call (678) 679-2152 for an inspection.
We coordinate cutover timing with your property manager or HOA board to minimize resident disruption. For shared entries in Roswell communities like Horseshoe Bend or Martin’s Landing, we typically install the new keypad and program resident remotes on a temporary channel before the old system is decommissioned, ensuring 24-hour access throughout the work. We also document every remote code and access credential before we start, under Haven Standard Clause 4. Call (678) 679-2152 to plan your community’s cutover schedule.
Yes, solar operators are viable for Roswell gates without trenching to the house, but performance depends on gate weight, daily cycle count, and tree canopy shading the panel. We size the solar array and battery bank to your specific gate - a light residential swing gate in a sunny Roswell clearing cycles reliably, while a heavy double gate under oak canopy may need a grid-tied solution. We quote both options in writing. Call (678) 679-2152 for a site assessment.
We install and service nine automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - and we stock parts for LiftMaster, FAAC, and Linear locally for fast turnaround on Roswell HOA service calls. We don’t push one brand. We match the operator to your gate’s weight, cycle count, and existing remote ecosystem. For a brand-specific recommendation and written price, call (678) 679-2152.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Roswell since 2014.