FAAC Gate Parts & Welding Nationwide

FAAC Gate Parts & Welding in Alpharetta: What to Know First

We provide independent FAAC gate parts and welding in Alpharetta, with most hinge replacements and rail repairs completed in a single visit and pricing written out before any work starts. Typical turnaround for a FAAC swing-arm bracket weld or slide-gate roller replacement is same-day to 48 hours, depending on whether the part is in our Alpharetta-area stock or needs to come from our FAAC parts pipeline. We’re not an authorized FAAC dealer - we’re an independent FAAC service provider - which means we source OEM or quality aftermarket parts based on what actually fixes your gate, not what moves inventory.

Call (678) 679-2152

This page is for Alpharetta homeowners and property managers running FAAC 402, 422, 770, or 844 series operators who need the mechanical side fixed: hinges, posts, rails, rollers, latches, or custom welding where the gate leaf has sagged or cracked. If your FAAC gate is binding, grinding, or has stopped mid-travel because the physical hardware failed, we can name what we found, name what it costs, and name what we left behind. Call (678) 679-2152 for a free written estimate.

How FAAC Products Fail - and How We Fix Them

• 402 / 422 swing-gate arm bracket fatigue. The cast aluminum bracket that mates the FAAC piston arm to the gate leaf develops stress cracks after roughly 8-12 years in Alpharetta’s freeze-thaw cycle, especially on north-facing drives where morning ice lingers. We pull the bracket, magnaflux it for hidden cracks, and either weld-reinforce the mounting ear or replace it with a steel-reinforced aftermarket bracket that outlasts the original geometry.
• 770 slide-gate roller seizure on sloped drives. The 770’s bottom guide rollers carry more load than the spec sheet implies when the track isn’t perfectly level. In Alpharetta’s clay-heavy soils, post settlement is common along Windward Parkway and the Avalon-adjacent subdivisions. We replace the seized roller with a sealed-bearing upgrade, shim the post if it’s drifted, and weld a new roller bracket when the original has ovalized.
• 844 hydraulic swing-gate hinge pin galling. The 844’s high-torque hydraulic close generates tremendous hinge load. When grease maintenance lapses, the stainless pin cold-welds to the bronze bushing. We cut the pin out, bore the hinge ear clean, and either press-fit a new flanged bushing or weld in a hardened steel sleeve if the ear has wallowed.
• FAAC control-board mounting rail corrosion. The steel rail that carries the 770 or 844 control enclosure sits low and collects splashback. We’ve pulled rails in Alpharetta that were paper-thin from the inside out. We fabricate a replacement from 11-gauge galvanized, weld it to the post with proper drain holes, and relocate the enclosure above the splash zone when site conditions allow.
• Safety edge rail extrusion cracking on vinyl-wrapped gates. FAAC’s rubber safety edge slides into an aluminum extrusion that’s often screwed, not welded, to the gate frame. After years of flex, the screw holes elongate and the extrusion separates. We remove the extrusion, weld a continuous aluminum backing strip to the gate frame, and re-rivet the extrusion with proper spacing so the safety edge reads true.

Our FAAC Gate Parts & Welding Process

1. 1
   Call intake with a live person. A real technician-trained dispatcher answers, asks for your FAAC model number (found on the operator cover or control board), and books a window. No voicemail, no callback queue.
2. 2
   On-site diagnostic with documentation. The technician photographs the failure before touching anything - hinge crack, roller seizure, rail corrosion - and records the FAAC part numbers visible on the hardware. Under Haven Standard Clause 4, this photo log becomes your record and ours.
3. 3
   Parts decision: OEM or quality aftermarket. We stock common FAAC wear parts in the Alpharetta area. For obsolete 402 series brackets or specialty hydraulic fittings, we source OEM through our independent parts network or fabricate equivalent geometry from certified steel or aluminum. You see the part cost in writing before we order.
4. 4
   Repair and weld with post-check. We weld with 70S-6 wire on steel, 4043 filler on aluminum, and always check post plumb and gate swing geometry before the operator re-engages. A gate that swings true protects the FAAC motor from repeat overload.
5. 5
   Cycle test and limit verification. We run the full open-close cycle 10 times, verify the FAAC limit switches read correctly, and photograph the final settings. The written price from Clause 1 is the price on the invoice - no additions after the fact.
6. 6
   365-Day Done Right Promise activation. The repair is covered for one full year. If the weld cracks, the roller seizes, or the hinge re-galls, we make it right at no charge. No expiration within that window, no argument.

Before

After

What FAAC Gate Parts & Welding Costs in Alpharetta

These are Alpharetta-market ranges based on our 2024-2025 FAAC parts and welding jobs. The exact price depends on what we find when we’re standing at your gate. We write the scope and the price before any work starts - Haven Standard Clause 1 - and the estimate is free. Call (678) 679-2152 to schedule.

Why Alpharetta Homeowners Call Vance Gate Repair Alpharetta for FAAC Work

We’ve repaired and installed over 22,000 gates since 2014, and a significant share of those have been FAAC operators in Alpharetta’s gated communities and estate drives. Adrian Vance developed his documentation habit on commercial access-control sites in Queens and carried it into every residential job: name what you found, name what it costs, name what you left behind. That means your FAAC repair comes with a photographed record, a written price agreed in advance, and a technician who knows the difference between a 402 and an 844 without reading the label twice.

We’re also not a single-brand shop. We service nine automation brands - including LiftMaster, Mighty Mule, Ghost Controls, and DoorKing - so if your FAAC operator has reached end-of-life and replacement makes more sense than another weld, we can quote that honestly rather than steering you toward the only brand we stock. The 365-Day Done Right Promise covers all completed work. A live person answers the phone 24/7, and we dispatch background-checked, uniformed technicians with name and photo provided before arrival.

FAQs