Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Ghost Controls Gate Repair in Roswell, GA | Vance Gate Repair Alpharetta
Gate Repair in Roswell for Ghost Controls typically runs $180-$420 for most board, arm, or battery replacements, with full operator replacement on aging HOA systems reaching $1,800-$2,400 when clay-shifted posts require rebuilding. We’re an independent Ghost Controls service provider - not manufacturer-authorized - and we carry genuine Ghost Controls boards, arms, and batteries for same-day resolution on most Roswell calls. Call (678) 679-2152 for a free estimate with written pricing before any work begins.
Why Roswell Residents Choose Us for Ghost Controls Service
We’ve worked on Ghost Controls operators across North Fulton since 2014, from first-generation TS1 single-swing kits to current TDS2 dual-arm builds with solar charging and keypad entry. Adrian Vance started this company after nearly two decades in commercial access-control work, and that documentation habit - name what you found, name what it costs, name what you left behind - carries into every residential driveway gate we touch in Roswell.
Our technicians know the Ghost Controls platform board-by-board. We understand how its solar charge controllers behave when Chattahoochee-corridor humidity swells for months, how the soft-start logic trips when red-clay post shift binds a heavy iron gate, and which receiver boards are still available versus discontinued. We stock genuine Ghost Controls parts locally, and when OEM components are no longer produced, we source quality aftermarket hardware that matches the specification without steering you toward an unnecessary full replacement.
Every Roswell visit operates under The Haven Standard: written scope, written price, photographic evidence. You get the price in your hand before we pick up a tool. Under Clause 4, every job leaves a documented photo record - what we found, what we adjusted, what we installed - so the next technician (even if it isn’t us) doesn’t pay twice to rediscover the same problem. Our 365-Day Done Right Promise covers all completed work with no expiration argument.
A live person answers our phone 24 hours a day. No voicemail loop, no callback queue.
Common Ghost Controls Gate Repair Problems We Solve in Roswell

- Solar charge-controller failure. On older Roswell HOA swing gates, sealed lead-acid batteries fail after 24-36 months of damp Chattahoochee-corridor humidity. The Ghost Controls charge controller overcharges or stops regulating, and the gate dies mid-cycle with a blinking fault code. We test the charging voltage, replace the battery with a Ghost Controls-compatible unit, and swap the controller if regulation has failed.
- Soft-start/soft-stop logic board failure. On heavy ornamental iron double gates in neighborhoods like Horseshoe Bend, the Ghost Controls control board’s current-sensing circuit trips or burns out when clay-induced post lean makes the gate bind. The opener ends up in a permanent mid-travel fault. We realign the gate first, then replace the board - never the reverse, because a new board will just burn again on a binding gate.
- Arm and pin wear on TDS/TS swing arms. Rust from buried hinge hardware and seasonal red-clay expansion causes gate sag, which side-loads the Ghost Controls arm pin and bushing until the gate drifts, reverses, or refuses to latch. In Roswell’s 25-35-year-old installations, we regularly find pins worn oval and bushings cracked from years of compensating for post movement.
- Remote-receiver and keypad pairing loss. In dense Roswell HOA communities, shared 318/433 MHz bands and failing Ghost Controls receiver modules cause intermittent range loss. Factory receiver boards for older units are no longer produced, so we diagnose whether the issue is environmental interference, antenna degradation, or board failure - then recommend repair or aftermarket replacement based on what we find.
- Battery backup degradation. Roswell’s temperature swings and humidity cycles shorten backup battery life on Ghost Controls solar and AC-powered systems alike. We load-test the battery under draw, check the charging circuit, and replace only what’s actually failed rather than swapping parts speculatively.
Before
AfterGhost Controls Service in Roswell: What Local Conditions Mean for Your Equipment
Roswell’s 1985-2000 building boom left HOA and private driveways with hundreds of original swing-gate operators now 25-35 years old, so the majority of Ghost Controls calls here are diagnosing end-of-life units rather than our Gate Installation in Roswell. That aging fleet means we regularly find discontinued Ghost Controls receiver and control boards inside gates whose mechanical frame is still serviceable - a repair-vs-replace decision that is far more common in Roswell than in newer suburbs like Alpharetta.
North Fulton County’s dense red clay soils expand heavily during wet seasons and shrink during summer droughts, causing gate posts to shift and lean over time. A swing gate that was plumb in October can bind by March. This progressive misalignment strains Ghost Controls operators until they fail, and it’s a recurring failure mode we see less often in the sandier soils south of the Perimeter. Roswell’s adjacency to the Chattahoochee River corridor keeps ground moisture elevated year-round, accelerating rust on buried hinge hardware and corrosion in the conduit runs serving underground slide-gate operators.
In established communities like Horseshoe Bend, our tech was called to a double ornamental-iron gate where the homeowner’s Ghost Controls TDS2 ran for a few feet, reversed, and faulted. We found the original arm pin bent from clay-induced post lean and the control board’s current-sense circuit tripped; we realigned the gate, replaced the arm and pin, and installed a fresh Ghost Controls-compatible battery, and the gate has cycled cleanly on schedule since. That call looked like a simple board swap from the description. Opening the operator told a different story.
Ghost Controls Models & Products We Service in Roswell

We service the full Ghost Controls residential and light-commercial lineup: the Heavy-Duty Dual Swing Gate Opener Kit (TDS series, including TDS2); the Single Swing Gate Opener Kit (TS series, including TS1); solar-powered swing-gate operators (solar kits paired with AXS/DE series swing arms); and entry keypads, remote receivers, and access accessories across the AXS and remote-kit lines.
Our Roswell-area van stocks genuine Ghost Controls control boards, replacement arms, pin-and-bushing kits, batteries, and charging modules. When Ghost Controls has discontinued a specific board or receiver - common on units installed before 2015 - we use quality aftermarket hardware that meets the original electrical specification. We don’t steer toward replacement when repair is viable. If the Ghost Controls chassis is sound and the failure is isolated to the arm, battery, or board, we fix it. If the track, posts, or frame are clay-shifted and structurally compromised, we’ll show you the photos and recommend a full operator replacement rather than chasing a dead board on a failing frame.
Ghost Controls Service Pricing in Roswell
Most Ghost Controls repairs in Roswell fall between these ranges:
- Diagnostic and minor adjustment (limit switch reset, photo-eye alignment, remote reprogramming): $120-$180
- Control board replacement (genuine Ghost Controls or compatible aftermarket): $280-$420
- Arm and pin/bushing replacement on TDS/TS series: $220-$340
- Battery and charge-controller replacement: $180-$280
- Full operator replacement with post realignment (common on 25-35-year-old Roswell HOA systems): $1,800-$2,400
What drives the cost: whether the failure is electrical (board, battery, receiver) or mechanical (arm, pin, post alignment), whether OEM parts are still available for that generation, and whether red-clay post shift has created secondary binding that must be corrected before the new component will survive. Every estimate is free, written, and delivered before any work starts - no call-for-pricing, no surprise invoice. Call (678) 679-2152 to schedule.
Serving Roswell, GA - Our Local Coverage Area

We’re based in the Roswell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Roswell
Usually it’s either a failed control board or a current-sense trip caused by mechanical binding. We test the arm for free movement first; if the gate binds from post lean or hinge corrosion, a new board will just burn out again. The diagnostic is free - call (678) 679-2152 and we’ll sort it on-site.
We install quality aftermarket receiver modules that match the Ghost Controls frequency and output specification. In Roswell’s dense HOA communities, we sometimes find that the original board failed from ambient 318/433 MHz interference rather than age, so we also evaluate whether an antenna relocation or shielded cable would help. Call (678) 679-2152 for an exact recommendation - estimates are free.
North Fulton red clay expands with spring rains and shrinks in summer drought, tilting posts and loading the Ghost Controls arm pin unevenly. We see this cycle repeatedly in Roswell’s older subdivisions. Temporary fixes (re-adjusting limit switches) last months; lasting fixes require post stabilization or hinge relocation. We photograph the lean, quote both options in writing, and let you decide.
Yes. We install Ghost Controls-compatible AXS keypads and smartphone-enabled receiver modules on existing TS and TDS systems. The integration depends on your control board generation - some older boards need a receiver upgrade to support modern access devices. We’ll check compatibility during the free estimate and quote the full scope before starting.
We service nine major automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - so we can work on whatever motor is already on your property. Our Ghost Controls sales & service page details our brand-specific expertise, and our Roswell service area page covers our full local coverage.
Service Areas Near Roswell

We run Ghost Controls service calls across North Fulton and surrounding communities. Our regular routes include Ghost Controls service in Alpharetta, where newer subdivisions see more installation work than Roswell’s aging fleet, and Ghost Controls service in Johns Creek, with its mix of estate properties and HOA systems. We also cover Milton, Duluth, and Norcross.
Book Your Ghost Controls Service in Roswell Today
Call (678) 679-2152 for same-day Ghost Controls gate repair in Roswell. A live person will answer, gather the symptoms, and dispatch a uniformed, background-checked technician with your name and photo confirmation before arrival. Written price before work starts. Photo record when we leave. 365-Day Done Right Promise on every job.
Written by Adrian Vance, Owner at Vance Gate Repair Alpharetta, serving Roswell and North Fulton since 2014.





Before
After
Before
After
Before
After