Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Alpharetta
Gate installation in Alpharetta typically runs $3,800-$12,500 for a complete driveway system with operator, and most projects are scheduled within 5-7 business days after the on-site measure and written quote. We dispatch our Gate Installation crews to Alpharetta from our Atlanta office, and we’ve worked inside enough Windward and Country Club of the South HOA protocols to know that a gate install here rarely starts with picking a motor. Call (678) 679-2152 for a free measure and written price.
Why Vance Gate Repair Alpharetta Is Alpharetta’s Preferred Gate Installation Company
We’ve installed and replaced gates in Alpharetta since 2014, and the pattern is unmistakable: neighborhoods built during the 1990s tech-corridor boom are now seeing simultaneous operator failures across entire subdivisions. Our 22,000+ gate jobs - every one with a written price before work started and a photo record when we left - include hundreds in Alpharetta’s master-planned communities where we coordinate directly with property management and HOA architectural review boards.
Alpharetta customers get the same documentation habit Adrian Vance developed on commercial access-control sites: wiring diagrams, limit-switch readings, and photographed as-found conditions. Under the Haven Standard, you receive the written scope and flat price before anyone picks up a tool, plus a 365-Day Done Right Promise with no expiration argument. A live person answers our phones 24 hours a day - no voicemail loop, no callback queue.
Our Gate Installation Services in Alpharetta
Driveway Gate Installation
Most Alpharetta driveway gates we install are ornamental iron or aluminum swing or slide systems on brick or stone pilasters, sized for the wider entries common in Country Club of the South and Windward-area homes. A typical new driveway gate with operator in Alpharetta runs $4,200-$8,900 depending on material gauge, access-control integration, and whether the existing pilasters need correction first. We measure, photograph, and write the full scope before ordering fabrication.
Swing Gate Installation
Swing gates dominate Alpharetta’s upscale single-family stock, but they’re also the most vulnerable to what Georgia red clay does over thirty years. In Country Club of the South, our crew installed a custom-fabricated ornamental iron double swing gate on settled brick pilasters that had shifted in the red clay, so we first corrected the post footings and hinge post alignment, then mounted a LiftMaster operator with safety photocells and a keypad entry tied into the existing DoorKing intercom. The heavier bespoke panels demanded precise sag correction, but after re-pouring the pilaster bases and dialing in the limit cams, the gate swings silently and evenly on every cycle. We coordinated the entire scope through the HOA architectural review before touching the operators.
Double Gate Installation
Double swing gates are the standard for Alpharetta’s two-car driveways and estate entries, and they require synchronized operators with adjustable delay between leaf openings. We see a lot of 1990s double gates where one leaf has sagged lower than the other due to pilaster settlement, so our install quotes include plumb-and-level verification of both posts before motor mounting. A new double swing system with dual Linear or Viking operators typically runs $5,500-$10,200 in Alpharetta.
Sliding Gate Installation
Sliding gates suit Alpharetta properties with steep uphill approaches or limited swing radius, particularly on lots backing to golf courses or green space where a swing leaf would intrude. We install cantilever and track-mounted systems, with track-grade concrete work that accounts for North Fulton County’s freeze-thaw cycle. A complete sliding gate with FAAC or BFT operator runs $6,200-$12,500 depending on track length and access-control integration.
Pedestrian Gate Installation
Many Alpharetta HOAs require matching pedestrian gates alongside driveway entries for architectural consistency. We fabricate and install walk-through gates to match existing ornamental iron or aluminum styles, with mag-lock or keypad access where the main entry uses intercom or RFID. These typically add $1,800-$3,400 to a driveway gate project.
Security Gate Installation
Alpharetta’s tech-industry workforce drives unusually strong demand for smart-access upgrades - app-based entry, RFID, video intercom - over simple like-for-like replacements. We install security gates with integrated access control, camera verification, and audit-trail logging for HOA-managed communities and private residences alike. Systems with full smart-access integration run $7,500-$14,000.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Alpharetta
We work on nine major automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - and we stock common FAAC and Linear operator parts for faster turnaround on Alpharetta jobs. For new installations, we typically specify Linear or Viking operators for heavy ornamental iron gates in Alpharetta’s HOA communities, where reliability under high cycle counts matters more than budget hardware. We don’t steer customers toward replacement when repair is viable, and we don’t push one brand over another unless the gate weight and cycle demand justify it.
Common Gate Installation Problems We See in Alpharetta Homes
- Simultaneous operator end-of-life across 1990s HOAs. Windward-area subdivisions are seeing 30-year-old FAAC, Elite, and Linear operators fail within months of each other, forcing full replacements during the same budget cycle rather than piecemeal repairs.
- Red-clay pilaster settlement throwing gates out of alignment. Georgia red clay soil shifts significantly with seasonal wet-dry cycles, and many Alpharetta gate pilasters poured in the 1990s have begun to lean or settle - a structural repair that often must be approved and partially funded by the HOA before the operator can even be touched.
- Winter ice damage to slide systems. North Fulton County’s periodic winter ice events freeze slide-gate tracks and crack hydraulic fluid in older operators, while summer humidity accelerates corrosion on iron gate hardware and causes moisture intrusion into control board enclosures.
- Smart-access integration with legacy intercom infrastructure. Alpharetta’s large tech-industry workforce expects app-based entry and RFID credentialing, but many 1990s-2000s communities still run original DoorKing or Elite intercom loops that require careful protocol matching during upgrades.
Pricing for Gate Installation in Alpharetta, GA
A typical new swing gate installation in Alpharetta runs $3,800-$7,500 for a standard single-leaf ornamental iron gate with operator and basic keypad access. Double swing systems with dual motors and intercom integration range $5,500-$10,200. Sliding gates with track work and heavy-duty operators run $6,200-$12,500. Pedestrian gates added to existing systems typically cost $1,800-$3,400.
What moves the price: pilaster correction or re-pouring ($800-$2,400), access-control upgrades like video intercom or RFID ($1,200-$3,800), and custom fabrication versus standard panel sizes. We deliver the written price before any work starts - Haven Standard Clause 1 - and we never invoice above the quoted scope. Free estimates include on-site measurement, photo documentation of existing conditions, and a written scope with line-item pricing.
| Gate Type | Typical Range in Alpharetta |
|---|---|
| Single swing gate with operator | $3,800 - $7,500 |
| Double swing gate with dual operators | $5,500 - $10,200 |
| Sliding gate with track and operator | $6,200 - $12,500 |
| Pedestrian gate (add-on) | $1,800 - $3,400 |
| Smart-access / video intercom upgrade | $1,200 - $3,800 |
| Pilaster correction or re-pour | $800 - $2,400 |
We Also Serve Cities Near Alpharetta
Our crews work throughout North Fulton and Forsyth County, including Gate Installation in Alpharetta and surrounding areas: Roswell, Duluth, Holly Springs, and Cumming. Dispatch and scheduling are coordinated from our Atlanta office, with local crews serving each market.
Serving Alpharetta, GA - Our Local Coverage Area
We’re based in the Alpharetta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Alpharetta
Yes, almost certainly. Alpharetta has one of the densest concentrations of HOA-governed gated communities in metro Atlanta, and most master-planned neighborhoods require architectural review board approval for gate style, material, height, and operator type before work begins. We prepare the submittal package - drawings, material samples, and scope of work - and coordinate directly with your property manager to keep the project on schedule. Call (678) 679-2152 and we’ll review your HOA’s requirements during the free estimate.
Neighborhoods built during the 1990s-2000s tech-corridor boom installed FAAC, Elite, and Linear operators with 20-30 year lifespans, and those units are now hitting end-of-life simultaneously across entire subdivisions. Budget-conscious HOAs often face multiple failure reports within a single quarter, shifting the conversation from repair to coordinated replacement. We help property managers phase replacement schedules and consolidate vendor relationships to control costs. Call (678) 679-2152 for a free assessment of your community’s operator inventory.
Yes, and it’s one of the most misdiagnosed gate problems we see in Alpharetta. Georgia red clay’s seasonal shrink-swell cycle causes concrete pilasters poured in the 1990s to settle or tilt, which changes the hinge geometry and prevents the gate from swinging true - no operator adjustment can compensate for a post that’s out of plumb. We check post alignment with a laser level before quoting any operator work, and we document the findings with photos under Haven Standard Clause 4. If your pilaster needs correction, we itemize that scope separately and coordinate HOA approval before starting. Call (678) 679-2152 for an inspection.
Every automatic gate in Alpharetta must have UL 325-compliant entrapment protection - typically safety photocells (infrared beams that stop the gate if crossed) and edge sensors on the leading edge of each leaf. We install and test both, document the settings with photos, and provide the homeowner and HOA with the compliance record. Under Clause 4 of the Haven Standard, this documentation stays in your job file for future reference. Call (678) 679-2152 to review entrapment protection for your specific gate type.
Yes, measurably. North Fulton County’s periodic winter ice events freeze slide-gate tracks and can crack hydraulic fluid in older operators, while the region’s high summer humidity accelerates corrosion on iron hardware and causes moisture intrusion into control board enclosures. Operators in Alpharetta’s climate typically show control board failures and hinge corrosion 15-25% earlier than identical hardware in drier climates. We specify sealed enclosures and corrosion-resistant hardware for new installations here, and we document seasonal maintenance recommendations in every job record. Call (678) 679-2152 for a free estimate that accounts for local conditions.
Ready for a written quote on your Alpharetta gate installation? Call (678) 679-2152 for a free on-site measure. We’ll photograph your existing conditions, check pilaster alignment, and deliver a flat price in writing before any work starts - Haven Standard Clause 1, every time.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Alpharetta since 2014.