Gate Installation in Marietta - Written Price, Install Date Set

Fast, Reliable Gate Installation Across Marietta

A new gate installation in Marietta typically runs $3,800-$12,500 depending on whether you’re replacing an existing ornamental iron swing gate on brick columns or installing a full driveway entry system with automation and access control. Most East Cobb installations we handle require documented finish matching for HOA approval, which adds a specification step upfront but prevents costly resubmission later. Our crews serve Marietta from our Atlanta scheduling office, and we carry the nine major automation brands so we can tie into whatever keypad, intercom, or camera system is already on the property rather than forcing a full rip-and-replace. Call (678) 679-2152 for a free measure and written estimate - the price we hand you is the price on the invoice, with no work starting until you’ve signed off under Haven Standard Clause 1.

Call (678) 679-2152

Why Vance Gate Repair Alpharetta Is Marietta’s Preferred Gate Installation Company

We’ve installed and replaced gates in Marietta since 2014, and the pattern is unmistakable: East Cobb’s estate subdivisions - Indian Hills, the Murdock Road corridors, the Pope High School area - were built mostly between the mid-1980s and early 2000s with ornamental iron swing gates on brick pillar entries. Those systems are now 20-35 years old, failing in clusters, and their HOAs require like-for-like finish documentation before any replacement clears architectural review. We know this because we’ve submitted hundreds of those spec sheets.

Our 22,000+ gate jobs since 2014 include a documented photo record on every visit - what we found, what we adjusted, what we installed - so no future technician has to rediscover the same problem and no homeowner pays twice for the same diagnosis. In Marietta specifically, that documentation habit matters because HOA architectural review boards here are active. A technician who shows up without a finish spec sheet and a plan for color-matched powder coating often loses the job, even on price.

Response time to Marietta is same-day for repair emergencies; installation work is measured, ordered, and scheduled. We don’t promise same-day gate hangs - that would mean skipping the soil assessment and footing depth check that keeps a heavy ornamental gate aligned through Georgia’s wet-dry cycles. We do promise a free measure, a written price before any work starts, and a named, background-checked technician with photo ID sent before arrival.

A live person answers our phone 24 hours a day, seven days a week. No voicemail loop, no callback queue, no automated attendant at any hour.

Our Gate Installation Services in Marietta

Driveway Gate Installation

Driveway gates in Marietta are almost always the statement piece of the property - and the heaviest mechanical load. In East Cobb, we’re typically replacing original ornamental iron double swing gates on brick columns that were poured in the 1990s or early 2000s, with Viking, Elite, or Linear operators that have reached end of life. New driveway gate installation here starts with a footing assessment: Marietta’s Georgia Piedmont red clay expands when wet and shrinks during summer droughts, so hinge posts and brick columns heave seasonally. If we don’t deepen the footings or add proper drainage during the install, a gate that hangs true in March will sag and bind by August. We document the footing depth and soil condition in the photo record we leave with you.

Swing Gate Installation

Swing gates are the dominant type in Marietta’s established neighborhoods, and they’re also the most sensitive to what happens below grade. The field vignette that sticks with our team: in the Indian Hills subdivision off Murdock Road, we replaced a pair of failing ornamental iron swing gates on original brick columns for a homeowner whose 22-year-old Elite operator had finally cooked its control board. We scanned the existing powder-coat color to match the HOA-approved finish, welded new frames to the original profile, and reset the hinge posts with deeper footings before hanging the leaves - then tied the new LiftMaster operator into the existing keypad entry and safety photocells. The gates now run silent through the full cycle, and the ARC sign-off cleared on the first submission because the finish spec sheet was attached. That’s the standard we apply to every swing gate installation in Marietta.

Sliding Gate Installation

Sliding gates make sense for Marietta properties with steep driveways or limited swing radius, and we’re seeing more interest in them for homes along the more densely wooded lots near Kennesaw Mountain’s foothills where a swing leaf would conflict with mature hardwood canopy. The same clay-heave problem applies to the track foundation, and the track itself needs protection from the limb drops that come with Cobb County’s heavy tree cover. We install cantilever systems where grade change makes ground track impractical, and we always spec the operator with enough duty-cycle headroom for twice-daily residential use - a common underspec we find on competitor installs.

Security Gate Installation

Security gates in Marietta range from simple pedestrian access controls for pool enclosures to full vehicle entry systems with loop detectors, intercoms, and camera integration for estate properties. East Cobb’s HOA-governed communities often have existing access-control infrastructure - keypad entry, telephone entry systems, photocell safety beams - that a new gate needs to tie into without disrupting. We service nine automation brands including FAAC, BFT, Linear, and Viking, so we can integrate with what’s there rather than defaulting to replacement. For new security gate installations, we spec the motor, control board, and safety edges to current UL 325 entrapment standards, and we leave you with the wiring diagram and limit-switch settings in the job documentation.

Pedestrian Gate Installation

Pedestrian gates in Marietta serve a different function than driveway gates - they’re the daily-use entry for dog walks, package retrieval, and visitor access. In downtown-adjacent neighborhoods with older housing stock, we often replace simple wood privacy fence gates from the 1950s-70s with matching styles that respect the neighborhood character. For newer construction, we fabricate ornamental iron pedestrian gates to complement the main driveway entry, with matching powder-coat finishes and compatible latch hardware. Every pedestrian gate installation includes the same written price upfront and photo documentation on completion.

Before

After

Trusted Brands We Service in Marietta

We carry parts and stock operators for nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Marietta customers, that means we can typically source a FAAC or BFT control board or a Linear actuator without the two-week special-order delay that sends homeowners to generic online retailers. Our Gate Installation team has factory-level familiarity with each brand’s limit-switch logic, safety-edge protocols, and keypad programming - critical when we’re tying a new gate into an existing access-control system in an East Cobb subdivision where the HOA prefers to keep the original telephone entry station. We don’t steer customers toward any single brand; we match the motor to the gate weight, cycle frequency, and what’s already wired at the property.

Common Gate Installation Problems We See in Marietta Homes

• Piedmont red clay heave misaligns new gates within a season. Marietta’s Georgia Piedmont red clay expands substantially when wet and shrinks during summer droughts. Gate posts and brick columns shift with it. We see gates installed by other companies that hung true at completion but dragged or bound within six months because the footings weren’t deepened or drained during the original install. We check soil conditions and document footing depth on every Marietta gate installation.
• HOA rejection for finish mismatch forces complete refabrication. East Cobb architectural review boards routinely reject gate replacements that don’t match the original ornamental iron profile or powder-coat color. A technician who skips the finish spec sheet step creates a costly resubmission cycle - and a homeowner who has to pay for fabrication twice. We scan existing finishes and attach the spec sheet to every ARC submission.
• Summer limb drops damage gate frames and control wiring. Cobb County’s mature hardwood canopy drops limbs after thunderstorms, bending ornamental iron gate frames and severing loop detector or photocell wiring runs. A gate panel replacement alone won’t address hidden control damage. We inspect the full control path and document it in the photo record.
• Aging 1990s brick columns crumble during new gate hang. The brick-column anchors common in East Cobb’s original construction weren’t designed for the load of modern automated gates with heavy-duty operators. During installation, we assess column integrity and recommend reinforcement or rebuild where needed - documented in writing before any work starts.

Pricing for Gate Installation in Marietta, GA

We Also Serve Cities Near Marietta

Our crews work throughout the northern Atlanta metro, including Marietta, Smyrna, Roswell, Holly Springs, and Alpharetta. Each city page has its own local context - Roswell’s historic district has different ARC requirements than East Cobb, and Alpharetta’s newer construction has different footing conditions - but the Haven Standard applies everywhere: written price before work starts, documented photo record on every visit, and the 365-Day Done Right Promise on all completed work. Dispatch and scheduling are coordinated from our Atlanta office; crews serve each city locally.

FAQs - Gate Installation in Marietta