Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDriveway Gate in Alpharetta, GA
Gate Installation services and driveway gate repair in Alpharetta, GA, typically range from $350 for minor motor adjustments or limit-switch calibration to $4,500+ for a full-system replacement, depending on the gate’s weight, material, and the automation brand involved. At Vance Gate Repair Alpharetta, we provide a written price before any work begins, ensuring you know exactly what the cost is before we pick up a tool. If your gate is stuck, making grinding noises, or failing to respond to your remote, call us at (678) 679-2152 to schedule a technician who arrives with the parts and tools to fix it right the first time.
We operate under The Haven Standard: every visit includes a documented photo record of the issue, the repair, and the final settings, which we leave with you. Whether you need a simple photo-eye alignment or a complete motor replacement for a heavy iron gate, we provide a written scope of work. We serve residential and light commercial clients throughout Alpharetta, focusing on getting your gate operational without the guesswork. For those looking to upgrade or install a new system, our Gate Installation in Alpharetta page details our specific approach to new hardware setup and perimeter security.
When You Need Driveway Gate Service
Gate issues in Alpharetta often stem from our local climate, including humidity that affects electronic control boards and the accumulation of pine straw and debris in tracks. We see these symptoms daily:
- The gate stops mid-travel: This often indicates a misaligned photo-eye (the infrared beam that stops the gate if an object is in the way). In Alpharetta, spiderwebs and debris frequently obstruct these sensors, causing the motor to halt for safety.
- Grinding or screeching noises: If you hear metal-on-metal sounds, it usually points to a failing bearing or a lack of lubrication on the chain or screw drive. We inspect the rollers and the track to prevent the gate from jumping off the rail.
- The gate won’t open or close: This can be a failed limit switch or a burned-out control board. Brands like BFT and Viking often have specific diagnostic codes that tell us exactly which component has failed.
- Remote control inconsistency: If your clickers work only when you are right next to the motor, the receiver or antenna may be failing or suffering from signal interference.
- Sagging or uneven movement: This is common with heavy swing gates. The hinge mounts may have pulled loose from the post, or the post itself may be shifting in the Georgia clay soil. We check the structural integrity of the mounting point before adjusting the motor.
If you notice any of these signs, avoid forcing the gate to move. Forcing a stuck motor can strip the internal gears, turning a $300 repair into a $1,200 motor replacement. Call (678) 679-2152 for an assessment.
Our Driveway Gate Process
We do not guess at problems. We follow a strict, documented process for every gate visit in Alpharetta to ensure nothing is missed and you are not paying for the same repair twice.
- Initial Assessment and Written Price: Upon arrival, our technician inspects the motor, the track, the hinges, and the control board. We explain what we found, why it failed, and provide a written price for the repair. You approve this price before we start.
- Diagnostic Documentation: Under Clause 4 of The Haven Standard, we take photographs of the gate’s condition, the wiring, and the specific failure point. We document the settings on your control board or limit switches.
- Professional Repair: We perform the repair using parts compatible with your system-whether you have a Linear, Ghost Controls, or LiftMaster motor. We replace only what is necessary to restore function.
- Final Verification and Photo Log: After the repair, we cycle the gate multiple times to ensure it meets safety standards. We then compile a photo record of the new parts and the adjusted settings, which we leave with you for your records.
- 365-Day Done Right Promise: If the repair does not hold, we return to make it right at no additional cost for one full year.
Before
AfterDriveway Gate Pricing in Alpharetta
We believe in upfront pricing. We do not provide “ballpark” numbers over the phone that change once we arrive. The price we write down is the price you pay. For more details, see our guide on How Much Does Gate Installation Cost? (2026 Price Guide) - Alpharetta, GA. The following table provides typical ranges for common services in the Alpharetta market.
| Service | Estimated Cost Range |
|---|---|
| Photo-eye alignment or sensor cleaning | $150 - $250 |
| Limit switch adjustment | $200 - $350 |
| Control board diagnostics & minor repair | $300 - $600 |
| Swing gate hinge repair or welding | $400 - $800 |
| Gate motor replacement (parts + labor) | $1,800 - $4,500+ |
Note: These are estimates. Final pricing is provided in writing after our technician inspects your specific setup. We offer a free second opinion on any written estimate from another company. Bring the paperwork, and we will review it at no cost. Call (678) 679-2152 for an exact quote.
Safety and Technical Warnings
A driveway gate or Pedestrian Gate is a heavy piece of machinery, often weighing several hundred pounds. It is powered by electricity and often held under tension by high-force springs or hydraulic pressure. Never attempt to adjust the tension on a garage or driveway gate spring yourself. These components can release with enough force to cause severe injury. If you hear a loud snap or see a cable dangling, keep people and pets away from the gate and call a professional immediately. We are equipped to handle high-tension repairs safely.
FAQs - Driveway Gate
Is it cheaper to repair or replace my driveway gate motor?
Generally, if your gate motor is less than 10 years old and the main housing is intact, repair is the cost-effective choice. We can often replace specific components like control boards, capacitors, or limit switches for a fraction of the cost of a full unit replacement. If the internal gears are stripped or the motor is obsolete, we will provide a written quote for a new unit. Call (678) 679-2152 to have our technician evaluate your current motor.
Can you service my gate if it was installed by another company?
Yes. We service nine major automation brands, including BFT, Linear, Viking, and Ghost Controls. We do not care who installed the gate or when; we care about the current state of the equipment. We will document the existing wiring and settings so that if you need service in the future, the next technician has a complete record of what was done.
How quickly can you respond to a gate failure in Alpharetta?
We maintain a live person on the phones 24/7. When you call (678) 679-2152, you speak to someone who can coordinate a technician. We prioritize service calls based on urgency-such as gates that are stuck open and compromising your property security-and we work to get a technician to your property as quickly as our schedule allows.
Why do I need a documented photo record of my gate?
A documented photo record ensures accountability and clarity. By keeping a log of the wiring, the limit switch settings, and the part numbers installed, we ensure that you know exactly what you paid for. This documentation prevents future technicians from having to guess how your system was configured, saving you time and money on future maintenance. This is a core part of The Haven Standard we apply to every job.
If you are ready to get your gate working properly, or if you have questions about your specific system, we are here to help. Contact our home office today.
Written by Adrian Vance, Owner at Vance Gate Repair Alpharetta, serving Alpharetta.